Titanium alloy seamless tubes represented by TC4 / GR5 (Ti-6Al-4V), TC11, TC18 in alloy tubes. Due to the hard material, drilling and hot extrusion technologies are generally used, mainly for petroleum logging, aerospace, and deep sea. Pressure-resistant equipment, etc.

Processing technology of titanium alloy pipe

Because the hardness and strength of titanium alloy pipe are different from that of pure titanium and other alloy titanium pipes, the ordinary cold rolling process can not be completed, and can only be processed by drilling process. That is, select the titanium rod of the same material, drilling → boring the inner hole → turning the outer circle. This process has low effective utilization rate of materials. The length of smaller diameter is limited, generally up to 1000mm, and the wall thickness of titanium alloy pipe is generally greater than 2mm. Generally customized processing, no spot, sold by piece.

If you are interested in our products, please email to：coleyuan@bjsdxty.com